Made of luxurious solid wood, the French door with two leaves is of an incomparable elegance. Its full-size glazing promotes exceptional brightness and adds to the prestige of your home. This splendid product is made using craftsmanship combined with state-of-the-art technology. It will brighten up your interior.
Solid Wood Construction
- Western Red Cedar, White Oak, Douglas Fir, African and Honduran Mahogany
- Solid wood only, no finger joints are used
Exterior Casing or Brickmold
- Available upon request in standard or custom sizes and profiles
- Interior casing is also available
Glass
- Factory glazed with single lite or with 7/8” double insulated glass units
- Tempered glass is standard across the United States
- Low-E, Argon filled, laminated and historical glass available
- Other options available upon request
1 5/8″ X 7 1/4″ Jamb, Standard Size
- Solid wood frame
- Unique design hardwood sloped sill
- Incredible strength, stability and durability
- Custom jamb depth available upon request
2 1/4″ Door Slab
- Mortise and tenon construction
- Fully weather-stripped
- High performance ratings and classic lines
1 5/8″ Astragal
- Solid Hardwood for superior strength
- Mortised or surface applied flush bolts on the inactive door leaf.
- Completely weather-stripped for maximum security and protection against the elements
Muntins
- 7/8″ Simulated divided lite (SDL) and 1 ¼” True divided lite (TDL) options
- With choice of colors for perimeter and internal spacer bars
Hardware
- Solid Brass 4” x 4” ball bearing hinges with flat tip
- Many decorative finials and finishes available
Screen
- 1 1/2″ thick solid wood screen door with fibreglass, stainless steel or bronze mesh is available
- Interchangeable storm door is also available
- Roll-up screens available upon request on special orders
Choice
- Inswing opening is standard and outswing with non removable pin hinges is available
- Available with arched top, transoms, sidelites or any other configurations
Because our Double French door are custom made, you can use your imagination and create your own design. We will be more than happy to satisfy your request.
Standard
![]() |
One insulated glass unit only. Consist of a 7/8” solid wood muntin applied on both sides (inside / outside) of the insulated glass unit with glazing tape.
Custom width and profiles are available upon request. |
SDL (Simulated Divided Lite)
![]() |
One insulated glass unit only. Consist of a 7/8” solid wood muntin applied on both sides (inside / outside) of the insulated glass unit with glazing tape.
An internal spacer bar aligned with the wood muntins give the appearance of the TDL. Custom width and profiles are available upon request. |
TDL (True Divided Lite)
![]() |
Multiple insulated glass units. Consist of a 1 1/4” solid wood muntin which divides the sash into multiple lites. Each lite get its own insulated glass unit. Custom width and profiles are available upon request. |
All our doors have to go through a rigorous process of testing and approvals. To pass the highest performance standards, Belisle’s products are tested, both in our R&D department and at an independent certified testing laboratory, under extreme weather simulations. All our products are rigorously tested for air and water infiltration as well as structural and energy performance.
Because we at Belisle are committed to receiving the best ratings, we are proud of the results from the many testing parties to which we submit our products – NFRC, Energy Star, or AAMA.
AAMA/WDMA/CSA 101/I.S.2/A440-05
Air tightness
|
A3
|
Water tightness
|
B2
|
Wind load resistance
|
C3
|
AAMA/WDMA/CSA 101/I.S.2/A440-05
Design Pressure ……………………………..DP35
It is extremely important that you install our wood products within 30 days after receiving. We recommend that you install our windows and doors plumb, level and square, as the state of art. Prior to being installed, they must be kept into a heated and humidity controlled area. This is to prevent any damages that may occur if not stored properly. Wood is a living material and must be treated as such. Until you have closed the walls, you want to make sure that your windows and doors are well prepared for the tough life that they will have.
All surfaces must be painted or stained before installation. You should always take advantages of our unique paint shop. We can finish all our products piece by piece prior to assembly to give you the maximum protection and make you save time and money. You must also make sure that maintenance is done on a periodic schedule. The secret to keeping your wood products in pristine condition is to keep the finish on the wood surface in good condition and always follow the manufacturer’s recommendations.
The hardware should also be inspected periodically. Most of the hardware we supply can be easily cleaned with soap and water only. You should also lubricate the hardware with Petroleum Jelly or Lithium Grease.
Our French doors are made with an active and a semi-active door. The semi-active door gets a hardwood astragal and flushbolts that can easily be disengaged for a full opening. Fixed or operating transoms and sidelites as well as custom grille patterns can be added to achieve the desired appearance.
Take a look at several models available or contact us for more details.
